TL FWD V6-3.5L (2009)
Intake Manifold: Service and Repair
Intake Manifold Removal and Installation
Intake Manifold Removal and Installation
Exploded View
Removal
1. Remove the engine compartment covers. See: Access Cover/Service and Repair
2. Disconnect the manifold absolute pressure (MAP) sensor connector (A) and the breather pipe (B), then remove the intake air duct (C).
3. Disconnect the throttle actuator connector (A), the evaporative emission (EVAP) canister purge valve connector (B), the water bypass hoses (C),
the EVAP canister hose (D), the brake booster vacuum hose (E), and the vacuum hose (F).
