TL FWD V6-3.5L (2009)
17. Install the upper half of the side engine mount bracket (A), then tighten the mounting bolts in the numbered sequence shown.
18. Install the ground cable (B).
19. Install the drive belt auto-tensioner. See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair/Drive Belt
Auto-Tensioner Replacement
20. Install the splash shield. See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement
21. Install the right front wheel.
22. Install the engine compartment covers. See: Access Cover/Service and Repair
23. Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure. See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview
