TL FWD V6-3.5L (2009)
Air Door Actuator / Motor: Service and Repair
Driver's Air Mix Control Motor Replacement
Driver's Air Mix Control Motor Replacement
1. Remove the driver's dashboard undercover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation
2. Remove the self-tapping screws, the air hose (A), and the driver's heater duct (B).
3. Disconnect the 7P connector (A) from the driver's air mix control motor (B). Remove the self-tapping screws and the driver's air mix control motor
from the heater unit.
4. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make
sure the motor runs smoothly.