TL FWD V6-3.5L (2009)
Opening the SRS Unit Shorting Connectors for Diagnosis
Special Tools Required
-
SRS short canceller 070AZ-SAA0100
NOTE:
-
To prevent damage to the connector cavity, insert short canceller straight into the cavity from the terminal side.
-
Before installing a short canceller, wash it with electrical contact cleaner, then dry it with compressed air.
-
Do not use a short canceller if it is damaged.
-
Make sure to remove the short canceller before reconnecting the SRS unit connector.
-
Some systems store data in memory that is lost when the battery is disconnected. Before disconnecting the battery, refer to Battery Terminal
Disconnection and Reconnection. See: Starting and Charging/Battery/Service and Repair/Procedures
When SRS unit connectors A (39P) or B (39P) are disconnected, a short circuit is automatically created in the connector to prevent accidental
deployment of an airbag or tensioner. The circuit may need to be opened when diagnosing the system. Insert a short canceller (070AZ-SAA0100) in the
specified cavities when necessary to keep the circuit open for diagnosis.
Terminal numbers are shown from the wire side of the female terminals. Insert the short canceller(s) into the cavities on the terminal side of the
connector.
