TL FWD V6-3.5L (2009)
Low Fuel Lamp/Indicator: Testing and Inspection
Low Fuel Indicator Test
1. Do the gauge self-diagnostic function. See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes
-
If the low fuel indicator flashes, go to step 2.
-
If the low fuel indicator does not flash, replace the gauge control module. See: Instrument Cluster / Carrier/Service and Repair
2. Check for body electrical system DTCs.
-
If any DTCs are indicated, do the indicated DTC's troubleshooting.
-
If no DTCs are indicated, go to step 3.
3. Do the fuel gauge sending unit test; without SH-AWD system, See: Fuel Gauge Sender/Testing and Inspection with SH-AWD system See: Fuel
Gauge Sender/Testing and Inspection (With SH-AWD system: and secondary fuel gauge sending unit test ).
