acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Fuel Gauge Sender|Service and Repair > < Fuel Gauge Sender|Locations|Page 8649
Page 2
background image

11. Reconnect the fuel tank unit 4P connector.

12. Remove the No. 15 BACK UP (10 A) fuse from the under-hood fuse/relay box for at least 10 seconds, then reinstall it.

13. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

14. Check that the pointer of the fuel gauge indicates F with the float at F.

-

If the pointer of the fuel gauge does not indicate F, replace the gauge control module.  See: Instrument Cluster / Carrier/Service and Repair

-

If the gauge is OK, the test is complete.

NOTE:
-

The pointer of the fuel gauge returns to the bottom of the gauge dial when the ignition switch is in ACC (I) and LOCK (0) or when the vehicle
is in ACC or OFF mode, regardless of the fuel level.

-

Remove the No. 15 BACK UP (10 A) fuse from the under-hood fuse/relay box for at least 10 seconds after completing troubleshooting,
otherwise it may take up to 20 minutes for the fuel gauge to indicate the correct fuel level.

Fuel Gauge Sender|Service and Repair > < Fuel Gauge Sender|Locations|Page 8649