TL FWD V6-3.5L (2009)
Turn Signal Lamp: Service and Repair
Front Turn Signal/Parking Light Replacement
Front Turn Signal/Parking Light Replacement
Replacement
1. Remove the splash shield. See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement
2. Remove the bolt(s) (A), then pull the front turn signal light (B) from the front bumper.
3. Install in the reverse order of removal.
With SH-AWD
Without SH-AWD
Bulb Replacement
1. Remove the inner fender. See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Inner Fender Replacement
2. Disconnect the 3P connector (A) from the front turn signal light (B).
3. Turn the bulb socket (C) 45 ° counter clockwise to remove it from the housing.
4. Install a new bulb in the reverse order of removal.