TL FWD V6-3.5L (2009)
If the indicated maintenance service is not done and the remaining engine oil life reaches 0%, the multi-information display will show the message
"SERVICE PAST DUE" and the maintenance item code(s). This message is displayed when the total mileage is less than 10 miles (for U.S, models) or
10 km (for Canadian models) after the engine oil life became 0%.
These messages will come on every time you turn the ignition switch to the ON (II) position.
Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. ON Mode is the equivalent of ON (II).
Immediately have the service performed, and make sure to reset the display. Refer to Instrument Panel, Gauges and Warning Indicators / Maintenance
Required Lamp/Indicator / Service and Repair: See: Service and Repair
Pressing either INFO button (up and down arrow icons) switches the display from the message to another display. To see the message again, press either
INFO button repeatedly.
