TL FWD V6-3.5L (2009)
15. Turn the crankshaft pulley so its white mark (A) lines up with the pointer (B).
NOTE: The other pointer (C) is not used.
16. Check the camshaft pulley marks.
NOTE: If the marks are not aligned, rotate the crankshaft 360 degrees, and recheck the camshaft pulley mark.
-
If the camshaft pulley marks are at TDC, go to step 17.
-
If the camshaft pulley marks are not at TDC, remove the timing belt and repeat step 2 through 16.
FRONT
REAR
