TL FWD V6-3.5L (2009)
17. Check the wheel alignment, and adjust it if necessary. See: Alignment/Service and Repair
Wheel Bearing Replacement
1. Separate the hub (A) from the knuckle (B) using the hub dis/assembly tool and a hydraulic press. Hold the knuckle with the attachment (C) of the
hydraulic press or equivalent tool. Be careful not to damage or deform the splash guard (D). Hold onto the hub to keep it from falling when
pressed clear.
2. Press the wheel bearing inner race (A) off of the hub (B) using the hub dis/assembly tool, a commercially available bearing separator (C), and a
press.
3. Remove the snap ring (A) and the splash guard (B) from the knuckle (C).