TL FWD V6-3.5L (2009)
Relay Box: Service and Repair
Passenger's Under-Dash Fuse/Relay Box (MICU) Removal/Installation
Passenger's Under-dash Fuse/Relay Box (MICU) Removal/Installation
NOTE: SRS components are located in this area. Review the SRS component locations, See: Restraint Systems/Air Bag Systems/Locations and
precautions and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service
and Repair before doing repairs or servicing.
Removal
1. Do the battery terminal disconnection procedure. See: Starting and Charging/Battery/Service and Repair/Procedures
2. Remove the passenger's kick panel. See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Interior Trim
Removal/Installation - Front Door Sill Area
3. Disconnect the connectors from the passenger's under-dash fuse/relay box (A).
4. Loosen the mounting bolt from the lower side of passenger's under-dash fuse/relay box.
5. Remove the mounting bolt from the upper side of passenger's under-dash fuse/relay box, and remove the passenger's under-dash fuse/relay box.
Installation
1. Install the relays and connect the connectors to the passenger's under-dash fuse/relay box, then install the passenger's under-dash fuse/relay box in
the reverse order of removal.
2. Install the removed parts in the reverse order of removal.
3. Do the battery terminal reconnection procedure. See: Starting and Charging/Battery/Service and Repair/Procedures
4. Confirm that all systems work properly.