TL FWD V6-3.5L (2009)
62. Jump the SCS line with the HDS.
63. Disconnect PCM connectors A (49P) and B (49P).
64. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
65. Measure the voltage between PCM connector terminal B42 and body ground.
Is there battery voltage?
YES - Go to step 66.
NO - Repair open in the wire between the No. 9 FUEL PUMP (20 A) fuse and the PCM (B42).
66. Measure the voltage between PCM connector terminal A6 and body ground.
Is there battery voltage?
YES - Go to step 71.
NO - Go to step 67.
67. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
68. Remove PGM-FI main relay 1 (A) from the under-hood fuse/relay box.