TL FWD V6-3.5L (2009)
Oxygen Sensor: Service and Repair
A/F Sensor Replacement
A/F Sensor Replacement
Special Tools Required
-
O2 sensor wrench, Snap-on YA8875 or SWR2, or equivalent, commercially available
Front Bank (Bank2)
1. Disconnect the front A/F sensor 6P connector (A), then remove the A/F sensor (B).
2. Install the parts in the reverse order of removal.
Rear Bank (Bank1)
1. Disconnect the rear A/F sensor 6P connector (A), then remove the A/F sensor (B).
2. Install the parts in the reverse order of removal.