TL FWD V6-3.5L (2009)
Exhaust/Engine/Engine Lubrication/Engine Oil/Service and Repair and engine oil filter, See: Engine, Cooling and Exhaust/Engine/Engine
Lubrication/Oil Filter/Service and Repair then go to step 27.
27. If the READ DATA failed in step 9 or the WRITE DATA failed in step 22, replace the ATF, See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/ATF Replacement then go to step 28.
28. Select PGM-FI system, and reset the PCM with the HDS.
29. Update the PCM if it does not have the latest software. See: Testing and Inspection/Programming and Relearning/PCM Update
30. Do the PCM idle learn procedure. See: Testing and Inspection/Programming and Relearning/PCM Idle Learn Procedure
31. Do the CKP pattern learn procedure. See: Testing and Inspection/Initial Inspection and Diagnostic Overview