TL FWD V6-3.5L (2009)
control shaft back two click-stopped positions so that it is in the N position.
12. Set a new transmission range switch (A) to the N position. The transmission range switch clicks in the N position, and the selector control shaft
slot (B) aligns with the N position line (C).
13. Install the transmission range switch (A) gently over the selector control shaft (B), and install the bolts loosely.
14. Install a new lock washer (A) over the selector control shaft (B) while aligning the indicator tab (C) of the lock washer with the N positioning line
(D) on the transmission range switch (E), and install the locknut (F).
