TL FWD V6-3.5L (2009)
9. Remove the EVAP canister vent shut valve (A) and the FTP sensor (B) from the canister (C).
10. Reassemble the EVAP canister with new O-rings (D) and a new retainer (E), then install the EVAP canister bracket.
NOTE: Do not coat the O-rings with oil.
11. Install the EVAP canister assembly to the body.
NOTE: Attach the bracket arm (A) to the body as shown.
12. Install the parts in the reverse order of removal. Use new bolts when you install the rear subframe.
13. Check the wheel alignment. See: Maintenance/Alignment/Service and Repair
