TL FWD V6-35L (2009) Fuel Injector Component Information Diagrams
16. Connect the quick-connect fitting; without SH-AWD system, See: Fuel Line Coupler/Service and Repair/Fuel Line/Quick-Connect Fitting
Installation with SH-AWD system. See: Fuel Line Coupler/Service and Repair/Fuel Line/Quick-Connect Fitting Installation
17. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, but do not operate the starter. After the fuel pump
runs for about 2 seconds, the fuel rail will be pressurized. Repeat this two or three times, then check for fuel leaks.
18. Install the intake manifold with a new gasket. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold
Removal and Installation
