TL FWD V6-3.5L (2009)
Fuel Line Coupler: Service and Repair
Fuel Line/Quick-Connect Fitting Installation
Fuel Line/Quick-Connect Fitting Installation
Without SH-AWD
NOTE: Before you work on the fuel lines and fittings, read the "Fuel Line/Quick-Connect Fitting Precautions". See: Service Precautions
1. Check the contact area (A) of the line (B) for dirt or damage, and clean it if needed.
2. Insert a new retainer (A) into the connector (B) if the retainer is damaged, or after:
-
replacing the fuel rail.
-
replacing the fuel line.
-
replacing the fuel pump.
-
replacing the fuel filter.
-
replacing the EVAP canister.
-
replacing the fuel fill pipe.
-
replacing the fuel tank.
-
removing the retainer from the line.
-
Use the same manufacturer retainer and the same size retainer when the replacing the retainer. See: Service Precautions
3. Before connecting a new fuel line/quick-connect fitting assembly (A), remove the old retainer (B) from the mating line.