TL FWD V6-3.5L (2009)
Fuel Pressure Regulator: Service and Repair
Fuel Pressure Regulator Replacement
Without SH-AWD
1. Remove the fuel tank unit. See: Fuel Tank/Fuel Gauge Sender/Service and Repair/Fuel Tank Unit Removal and Installation
2. Remove the reservoir (A).
3. Remove the bracket (B).
4. Remove the fuel pressure regulator (C) and the backup ring (D).
5. Install the parts in the reverse order of removal with new O-rings (E) and a new bracket. When installing the fuel tank unit, align the marks on the
fuel tank unit and the fuel tank. See: Fuel Tank/Fuel Gauge Sender/Service and Repair/Fuel Tank Unit Removal and Installation
NOTE:
-
Coat the O-rings with clean engine oil; do not use any other type oils or fluids.
-
Do not pinch the O-rings during installation.
-
Use all the new parts supplied in the pressure regulator replacement kit.