TL FWD V6-3.5L (2009)
Fuel Tank Unit: Service and Repair
Fuel Pump/Fuel Gauge Sending Unit Replacement
Fuel Pump/Fuel Gauge Sending Unit Replacement
1. Remove the fuel tank unit; without SH-AWD system, See: Fuel Tank/Fuel Gauge Sender/Service and Repair/Fuel Tank Unit Removal and
Installation with SH-AWD system. See: Fuel Tank/Fuel Gauge Sender/Service and Repair/Fuel Tank Unit Removal and Installation
2. Remove the fuel level sensor (fuel gauge sending unit) (A) from the fuel tank unit (B).
3. Check these items before installing the fuel tank unit:
-
When connecting the wire harness, make sure the connection is secure and the connector (C) is firmly locked into place.
-
When installing the fuel gauge sending unit, make sure the connection is secure. Be careful not to bend or twist it excessively.
4. Install the parts in the reverse order of removal. When installing the fuel tank unit, align the marks on the unit and the fuel tank; without SH-AWD
system, See: Fuel Tank/Fuel Gauge Sender/Service and Repair/Fuel Tank Unit Removal and Installation with SH-AWD system. See: Fuel
Tank/Fuel Gauge Sender/Service and Repair/Fuel Tank Unit Removal and Installation
Without SH-AWD
With SH-AWD
