TL FWD V6-3.5L (2009)
Remote Slot Control Unit
18. Press the engine start/stop button to select the OFF mode.
19. Remove the glove box. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation
20. Disconnect the connector (A) from the remote slot control unit (B).
21. Inspect the connector and the socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 22.
22. With the connector still disconnected, do these input tests at the following connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 23.
23. Reconnect the connector to the remote slot control unit, and do these input tests at the following connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 24.