TL FWD V6-3.5L (2009)
-
Connect a jumper battery (do not connect a battery charger).
-
Shut down the HDS.
-
Disconnect the HDS from the DLC.
-
Reboot the HDS.
-
Reconnect the HDS to the DLC, and try the update procedure again.
8. If the TP POSITION CHECK failed in step 5, clean the throttle body. See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Procedures
9. Do the PCM idle learn procedure. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Programming and
Relearning/PCM Idle Learn Procedure
10. Do the CKP pattern learn procedure. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Initial Inspection and
Diagnostic Overview