TL FWD V6-3.5L (2009)
6. Move the power window all the way down using the power window DOWN switch.
7. Pull up and hold the power window UP switch until the power window is all the way up, then continue to hold the switch for at least 1 second.
8. Confirm that the power window control unit is reset by using the power window AUTO UP and AUTO DOWN function.
-
If the power window still does not work in AUTO, repeat the procedure several times, paying close attention to the 5 seconds time limit
between steps.
-
If it still does not work, go to B-CAN System Diagnosis Test Mode A. See: Powertrain Management/Computers and Control
Systems/Information Bus/Testing and Inspection/Component Tests and General Diagnostics/Troubleshooting - B-CAN System Diagnosis Test
Mode A
