TL FWD V6-3.5L (2009)
Fuel Door Switch: Testing and Inspection
Fuel Fill Door Opener Switch Test/Replacement
1. Remove the driver's door panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front
Door Panel Removal/Installation
2. Disconnect the 6P connector (A) from the fuel fill door opener switch (B).
3. Check for continuity between terminals No. 1 and No. 3.
-
With the switch pushed, there should be continuity.
-
With the switch released, there should be no continuity.
4. If the continuity is not as specified, remove the two screws and replace the switch.