TL FWD V6-3.5L (2009)
8. Remove the combination light switch (A) and the wiper/washer switch (B) from the combination switch body assembly (C).
9. Install the combination switch body assembly in the reverse order of removal, and note these items:
-
Do not remove the steering angle sensor from the combination switch body.
-
When installing the cable reel, set the turn signal canceling sleeve position so that the arrow points straight up. See: Restraint Systems/Air Bag
Systems/Clockspring Assembly / Spiral Cable/Service and Repair
-
Note that the tightening order is specified for the combination switch assembly/cable reel mounting screws. See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Steering Column Removal and Installation
-
With SH-AWD: Do the VSA sensor neutral position memorization. See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Programming and Relearning/VSA Sensor Neutral Position Memorization