TL FWD V6-3.5L (2009)
Cabin Temperature Sensor / Switch: Service and Repair
Humidity/In-car Temperature Sensor Replacement
1. Remove these items:
-
Driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver's
Dashboard Undercover Removal/Installation
-
Remote slot (with keyless access) See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Testing and
Inspection/Component Tests and General Diagnostics/Keyless Access System Remote Slot Test/Replacement
2. Disconnect the air hose from the heater unit. See: Heating and Air Conditioning/Air Door/Air Door Actuator / Motor/Service and Repair/Driver's
Air Mix Control Motor Replacement Keep grip on air hose while doing following procedures to assist in removal of sensor.
3. Disconnect the connector (A) from the Humidity/in-car temperature sensor (B).
View from top
4. Unhook the left lock tab (A) of the humidity/in-car temperature sensor by pushing your thumb (B) between the sensor and tab (C).
5. Pull sensor toward steering column to unlock right lock tab (A). Maintain the pressure with thumb to keep left tab unlocked while unhooking right
lock tab then pull out the sensor.
6. Install the sensor in the reverse order of removal.
