TL FWD V6-3.5L (2009)
Installation (without SH-AWD)
1. Temporarily attach a new base gasket (A) to the fuel tank unit (B), then insert the fuel tank unit partially into the fuel tank.
NOTE:
-
Be careful not to damage the new base gasket.
-
Be careful not to bend the fuel gauge sending unit.
-
Do not coat the base gasket with oil.
2. Transfer the base gasket (A) from the fuel tank unit to the fuel tank.
3. Align the marks (B) on the fuel tank and fuel tank unit, then insert the fuel tank unit into the fuel tank until the fuel tank unit rests on top of the
base gasket.
NOTE: To avoid a fuel leak, check the base gasket, visually or by hand, to make sure it is not pinched.
4. Using the special tool, tighten a new locknut (A) with a new locknut plate (B) to the specified torque.
NOTE:
