TL FWD V6-3.5L (2009)
Shift Interlock Switch: Service and Repair
A/T Park Pin Switch Replacement
NOTE: The park pin switch, and the shift lock solenoid harness are not available separately. Replace the park pin switch, and the shift lock solenoid
harness as a set.
1. Remove the shift lock solenoid. See: Powertrain Management/Transmission Control Systems/Testing and Inspection/Component Tests and
General Diagnostics/A/T Shift Lock Solenoid Test
2. Remove the harness wire ties (A), and remove the park pin switch (B).
3. Replace the park pin switch.
4. Install the park pin switch, and secure the park pin switch with the new screw (C).
5. Connect the shift lock solenoid connector to the shift lock solenoid. Then install the shift lock solenoid. See: Powertrain
Management/Transmission Control Systems/Actuators and Solenoids - Transmission and Drivetrain/Actuators and Solenoids - A/T/Shift Interlock
Solenoid/Service and Repair
6. Route the harnesses as shown. Take the slack out of the harnesses, and secure the harnesses with the harness wire ties (A).
7. Install the shift lever boot base. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Removal
and Replacement/A/T Shift Lever Boot and A/T Shift Lever Boot Base Replacement
8. Install the shift lever assembly. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Removal
and Replacement/A/T Shift Lever Installation
