TL FWD V6-3.5L (2009)
Ignition Switch: Testing and Inspection
Ignition Key Switch Test (Without Keyless Access System)
Ignition Key Switch Test
1. Remove the steering column upper and lower covers. See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service
and Repair
2. Disconnect the 6P connector (A).
3. Check for continuity between terminals No. 1 and No. 2.
-
There should be continuity with the key in the ignition switch.
-
There should be no continuity with the key removed.
4. If the continuity is not as specified, replace the steering lock assembly. See: Steering and Suspension/Steering/Steering Column/Steering Column
Lock/Service and Repair/Steering Lock Replacement (Without Keyless Access System)
