TL FWD V6-3.5L (2009)
Armature Inspection and Test
5. Disassemble the starter as shown at the beginning of this procedure View.
6. Inspect the armature for wear or damage from contact with the permanent magnet. If there is wear or damage, replace the armature.
7. Check the commutator (A) surface. If the surface is dirty or burnt, resurface it with an emery cloth or a lathe to the specifications in step 8, or
recondition with # 500 or # 600 sandpaper (B).
8. Check the commutator diameter. If the diameter is below the service limit, replace the armature.
