acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Key Interlock System Circuit Troubleshooting (Without Keyless Access System)|Page 6010 > < Key Interlock System Circuit Troubleshooting (Without Keyless Access System)|Page 6008
Page 3
background image

16. Disconnect the transmission range switch connector.

17. Check for continuity between driver's under-dash fuse/relay box connector F (33P) terminal No. 4 and transmission range switch connector

terminal No. 7.

Is there continuity?
YES -  Go to step 18.

 

NO -  Repair open in the wire between the driver's under-dash fuse/relay box and the transmission range switch.

 

18. At the transmission range switch, check for continuity between the terminals No. 5 and No. 7.

Is there continuity?
YES -  Go to step 19.

 

NO -  Check the transmission range switch adjustment  See: Powertrain Management/Computers and Control Systems/Sensors and Switches -
Computers and Control Systems/Transmission Position Switch/Sensor/Service and Repair and retest. If the still no continuity, replace the
transmission range switch.

 

19. Check for continuity between transmission range switch harness terminal No. 5 and body ground.

Is there continuity?
YES -  Substitute a known-good driver's under-dash fuse/relay box and retest.

 

Key Interlock System Circuit Troubleshooting (Without Keyless Access System)|Page 6010 > < Key Interlock System Circuit Troubleshooting (Without Keyless Access System)|Page 6008