TL FWD V6-3.5L (2009)
Control Arm: Service and Repair
Rear Lower Arm B Replacement
Rear Lower Arm B Replacement
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove the rear wheel.
3. Remove the lower arm B mounting bolts, then remove lower arm B.
NOTE: Use new mounting bolts during reassembly.
4. Install lower arm B in the reverse order of removal, and note these items:
-
First install all of the components, and lightly tighten the bolts, then raise the suspension to load it with the vehicle's weight before fully
tightening to the specified torque value.
-
Before installing the wheel, clean the mating surfaces on the brake disc/drum and the inside of the wheel.
5. Check the wheel alignment, and adjust it if necessary. See: Alignment/Service and Repair
