TL FWD V6-3.5L (2009)
5. Position the tab (A) on the spring mounting cushion facing forward but toward the inside of the vehicle.
6. Align the angle of the stud (B) on the damper mounting base (C) with the aligning tab (D) on the bottom of the damper unit as shown.
Left
Right
7. Install the damper mounting washer (Without SH-AWD) (A) and the new self-locking nut (B).
8. Hold the damper shaft with a hex wench (C), and tighten the self-locking nut to the specified torque value.
9. Remove the damper/spring from the strut spring compressor.