TL FWD V6-3.5L (2009)
Suspension Spring ( Coil / Leaf ): Removal and Replacement
Rear Damper/Spring Removal and Installation
Rear Damper/Spring Removal and Installation
Removal
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove the rear wheel.
3. Remove the brake hose mounting bolt (A).
4. Remove the rear seat. See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation
5. Remove the damper mounting nuts (A) from the top of the damper.
6. Remove the brake hose bracket mounting nuts (A), then disconnect the brake hose bracket (B) from the knuckle.
7. Remove the damper lower mounting bolt (C).
8. Remove the damper/spring (A) by lowering the rear suspension.
NOTE: Be careful not to damage the body.