TL FWD V6-3.5L (2009)
Installation
1. Clamp the new damper housing, the front wheelhouse, the wheelhouse upper inner, and the front bulkhead, and measure the front compartment
diagonally.
2. Check the body dimensions.
-
Engine compartment
-
Engine/transmission mount position
-
Front wheelhouse lower member position
-
Without SH-AWD model engine compartment and front floor, under view
-
With SH-AWD model engine compartment and front floor, under view
-
Repair chart, top view
-
Repair chart, side view
3. Tack weld the new parts and the front bulkhead into position.
4. Temporarily install the front subframe, and check the front side frame position.