TL FWD V6-3.5L (2009)
Fluid Pressure Sensor/Switch: Service and Repair
2nd Clutch Transmission Fluid Pressure Switch Replacement
2nd Clutch Transmission Fluid Pressure Switch Replacement
1. Disconnect the 2nd clutch transmission fluid pressure switch connector, and remove the 2nd clutch transmission fluid pressure switch (A).
2. Install a new 2nd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.
3. Make sure there is no water, oil, dust, or foreign particles inside the connector.
4. Connect the connector securely.