acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

A/T Clutch Pressure Control Solenoid Valve A and B Test|Page 4350 > < A/T Clutch Pressure Control Solenoid Valve A and B Test|Page 4348
Page 3
background image

16. Remove A/T clutch pressure control solenoid valves A and B, the ATF pipes (C), the gasket (D), and the O-rings (E).

17. Check the fluid passage of the solenoid valve for contamination.

18. Connect a jumper wire from the negative battery terminal to A/T clutch pressure control solenoid valve A or B connector terminal No. 2, and

connect another jumper wire from the positive battery terminal to connector terminal No. 1. Make sure A/T clutch pressure control solenoid valve
A or B moves.

19. Disconnect one of the jumper wires, and check valve movement at the fluid passage in the valve body mounting surface. If the valve binds or

moves sluggishly, or if the solenoid valve does not operate, replace A/T clutch pressure control solenoid valves A and B.

20. Clean the mounting surface and fluid passage of the solenoid valve body and the solenoid valve cover.

21. Install a new solenoid valve body gasket on the solenoid valve cover, and install the ATF pipes with the filter end in the transmission housing.

Install new O-rings over the ATF pipes.

22. Install A/T clutch pressure control solenoid valves A and B.

23. Install the harness cover on its bracket, and secure it with the bolt.

24. Check the connectors for rust, dirt, or oil, clean or repair if necessary, then connect the connectors securely.

25. Apply molybdenum grease to the hole in the bushing in the shift cable end. Attach the shift cable end to the selector control lever, then insert the

control pin into the selector control lever hole through the shift cable end, and secure the control pin with the spring clip.

26. Secure the shift cable bracket with the nuts.

27. Install the battery base.  See: Service and Repair/Removal and Replacement/Automatic Transmission Installation

28. Install the air cleaner assembly.  See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service

and Repair

29. Do the battery installation procedure.  See: Starting and Charging/Battery/Service and Repair/Removal and Replacement

A/T Clutch Pressure Control Solenoid Valve A and B Test|Page 4350 > < A/T Clutch Pressure Control Solenoid Valve A and B Test|Page 4348