TL FWD V6-3.5L (2009)
Shift Interlock Switch: Testing and Inspection
A/T Park Pin Switch Test
1. Remove the center console panel. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Panel Removal/Installation
2. Disconnect the A/T shift lock solenoid/park pin switch 4P connector (A) from the park pin switch (B).
3. Check for continuity between terminals No. 3 and No. 4.
-
There should be continuity when the shift the shift out of P.
-
There should be no continuity when the shift the shift lever to P.
4. If the continuity is not as specified, replace the park pin switch. See: Service and Repair