TL FWD V6-3.5L (2009)
15. Remove the bolt securing the shift cable bracket (A).
16. Remove the shift cable grommet (B), and pull out the shift cable (C).
17. Insert a new shift cable through the grommet hole (D), and install the grommet in its hole. Do not bend the shift cable excessively.
18. Secure the shift cable bracket with the bolt.
19. Install the heat shield.
With SH-AWD
Without SH-AWD
20. Apply molybdenum grease to the hole in the bushing (A) in the shift cable end (B).
21. Attach the shift cable end to the selector control lever (C), then insert the control pin (D) into the selector control lever hole through the shift cable
end, and secure the control pin with the spring clip (E).