TL FWD V6-3.5L (2009)
11. Disconnect these connectors:
-
A/T clutch pressure control solenoid valve A connector (A)
-
A/T clutch pressure control solenoid valve B connector (B)
-
4th clutch transmission fluid pressure switch connector (C)
-
Shift solenoid wire harness connector (D)
12. Remove the bolt securing the harness cover (E), and remove the harness cover from its bracket (F).
13. Remove A/T clutch pressure control solenoid valves A and B, the ATF pipes (C), and the gasket (D).
14. Replace the gasket and the O-rings (E) with new ones when installing A/T clutch pressure control solenoid valves A and B.