TL FWD V6-3.5L (2009)
Transmission Speed Sensor: Service and Repair
A/T Input Shaft (Mainshaft) Speed Sensor Replacement
A/T Input Shaft (Mainshaft) Speed Sensor Replacement
1. Do the battery removal procedure. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
2. Disconnect the input shaft (mainshaft) speed sensor connector, and remove the input shaft (mainshaft) speed sensor (A).
3. Install a new O-ring (B) on a new input shaft (mainshaft) speed sensor, then install the input shaft (mainshaft) speed sensor.
4. Check the connector for rust, dirt, or oil, then connect the connector securely.
5. Do the battery installation procedure. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
