TL FWD V6-3.5L (2009)
Shift Interlock Switch: Service and Repair
A/T Park Pin Switch Replacement
NOTE: The park pin switch, and the shift lock solenoid harness are not available separately. Replace the park pin switch, and the shift lock solenoid
harness as a set.
1. Remove the shift lock solenoid. See: Transmission Control Systems/Testing and Inspection/Component Tests and General Diagnostics/A/T Shift
Lock Solenoid Test
2. Remove the harness wire ties (A), and remove the park pin switch (B).
3. Replace the park pin switch.
4. Install the park pin switch, and secure the park pin switch with the new screw (C).
5. Connect the shift lock solenoid connector to the shift lock solenoid. Then install the shift lock solenoid. See: Actuators and Solenoids -
Transmission and Drivetrain/Actuators and Solenoids - A/T/Shift Interlock Solenoid/Service and Repair
6. Route the harnesses as shown. Take the slack out of the harnesses, and secure the harnesses with the harness wire ties (A).
7. Install the shift lever boot base. See: Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Removal and Replacement/A/T Shift
Lever Boot and A/T Shift Lever Boot Base Replacement
8. Install the shift lever assembly. See: Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Removal and Replacement/A/T Shift
Lever Installation