TL FWD V6-3.5L (2009)
Transmission Speed Sensor: Service and Repair
A/T Output Shaft (Countershaft) Speed Sensor Replacement
A/T Output Shaft (Countershaft) Speed Sensor Replacement
1. Do the battery removal procedure. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
2. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A).
3. Install a new O-ring (B) on a new output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor and the sensor
washer.
4. Check the connector for rust, dirt, or oil, then connect the connector securely.
5. Do the battery installation procedure. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
