TL FWD V6-3.5L (2009)
Shift Solenoid: Service and Repair
Shift Solenoid Valve Removal and Installation
Shift Solenoid Valve Removal and Installation
NOTE:
-
Do not hold the solenoid valve connector to remove and install the solenoid valve. Be sure to hold the solenoid valve body.
-
Do not install shift solenoid valve C before installing shift solenoid valve A. If shift solenoid valve C is installed before installing shift solenoid
valve A, it may damage the hydraulic control system.
1. Remove the mounting bolts, then remove the solenoid valves by holding the solenoid valve body.
2. Install new O-rings (two O-rings per shaft solenoid valve) (E) on each solenoid valves.
NOTE: If you are installing a new solenoid valve, it comes with new O-rings already installed.
3. Install shift solenoid valve D (black connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator
body.
4. Install shift solenoid valve A (black connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator
body.
5. Install shift solenoid valve C (brown connector) by holding the shift solenoid valve body; be sure to position the mounting bracket on top of the
bracket of shift solenoid valve A.
6. Install shift solenoid valve B (brown connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator
body.
