TL FWD V6-3.5L (2009)
Power Window Switch: Service and Repair
Power Window Master Switch Replacement
Power Window Master Switch Replacement
1. Remove the driver's door armrest. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front
Door Panel Removal/Installation
2. Remove the two screws (A), then remove the bracket (B) from the armrest assembly (C).
3. Remove the four screws and the power window master switch (D).
4. Install the switch in the reverse order of removal.
5. After replacement, reset the power window control unit. See: Testing and Inspection/Programming and Relearning