TL FWD V6-3.5L (2009)
Front Door Window Regulator: Service and Repair
Front Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Panel
Removal/Installation
2. Raise the glass fully.
3. Remove the screws, then remove the door panel bracket (A).
4. Disconnect the power door lock actuator connector (A), and detach the harness clip (B). Remove the plug caps (C).
5. Pass the wire harnesses (D) through the slits (E) in the plastic cover (F), then remove the plastic cover.
NOTE: If the plastic cover is damaged or torn, replace it.
6. Detach the harness clip (A). Loosen the bolt (B), and remove the bolt (C), then remove the door panel bracket (D).