TSX L4-2.4L (2005)
Rear Bumper: Service and Repair
Rear Bumper Removal/Installation
NOTE:
-
Have an assistant help you when removing and installing the rear bumper.
-
Take care not to scratch the rear bumper and body.
-
Put on gloves to protect your hands.
1. Remove the rear bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and replace them with new ones.
-
Make sure the rear bumper engages the hooks of the side spacers, side brackets and upper brackets on both sides securely.