TSX L4-2.4L (2005)
Fuel Door Release Lever: Service and Repair
Trunk Lid Opener/Fuel Fill Door Opener Replacement
Special Tools Required
KTC trim tool set SOJATP2014*
*
Available through the American Honda Tool and Equipment Program; call 888-424-6857
NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Using a trim tool, detach the hooks (A) by prying the front side cap (B), then remove it from the front door sill trim (C), and remove the opener
lock cylinder (D).
2. Remove the bolt (E).
3. Remove the front door sill trim.
4. Remove the screw, then remove the trunk lid opener/fuel fill door opener (A) from the front door sill trim (B).
5. Install the opener in the reverse order of removal, and note these items:
-
Make sure the opener cable is connected properly.
-
Make sure the trunk lid and fuel fill door open properly and lock securely.
