acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Memory Positioning Systems > < How to Replace Connector Terminals|Page 8495
Page 2
background image

Defogger (Canada)

8. Connect the No. 12 and No. 11 terminals with a jumper wire, and check for voltage between the No. 2 terminal of the mirror connectors and body

ground. There should be battery voltage and both mirrors should warm up with the ignition switch ON (II).

-

If there is no voltage or neither warms up, check for:
-

An open in the BLK/YEL or ORN wire.

-

Blown No. 30 (7.5 A) fuse in the under-dash fuse/relay box.

-

If only one fails to warm up, check:
-

Its defogger.

-

Poor ground at G601 (left mirror) or G503 (right mirror).

-

If both warm up, check the defogger switch.

Memory Positioning Systems > < How to Replace Connector Terminals|Page 8495