TSX L4-2.4L (2005)
Sunroof / Moonroof Limit Switch: Adjustments
Limit Switch Adjustment
1. Remove the headliner.
2. With the moonroof wrench, close the glass (A) fully:
-
Make sure both link lifters (B) are parallel, and in the position shown.
-
Check the glass fit to the roof panel and the glass height.
3. With an open-end wrench, loosen the limit switch mounting bolts (C).
4. Adjust the limit switch (D):
-
Move the switch plate (E) a little at a time, then secure it at the position where you hear a faint click when the switch cam (F) pushes the limit
switch (open/close).
-
Check that the switch plate contacts the switch bracket (G).
5. Check the operation of the glass (from the tilt-up position to fully closed position, from the fully open position to the fully closed position) by
operating the moonroof switch.
NOTE: Adjust the switch plate until the glass opens and closes correctly.
6. Reinstall all remaining parts in the reverse order of removal.
